Product Introduction
ITS-TX2 barrier gate trigger radar applies international advanced 79GH working frequency and high speed digital data process technology. It has characteristics of high precision, debug free and high stability. The adjustable detection area and sensitive trigger can effectively distinguish the human/vehicle passing by to realize vehicle detectable only. And camera with trigger radar can achieve the vehicle capture rate to 99.6% with stable performance and high accuracy.
Trigger radar is applied in the entrance of parking garage. It controls camera to capture vehicle information at appropriate distance. By this way, radar provides reliable data for parking charge and management. And it becomes an important part of intelligent parking system.
Vehicle detection sensor ITS-TX1 is designed for the entrance and exit management of parking lot or underground garage.It can be used as trigger sensor which can precisely control the open&- close of the barrier arm by cooperating with the gate main control board , the sensor detection area can be configured by mobile App via bluetooth, compared with traditional loop detectors, it ‘s much more convenient and smarter, meanwhile no need any saw cuts. which greatly improve customer experience with its excellent performance and competitive cost.
The sensor is millimeter wave technology radar sensor with the highly integrated RF chip SOC scheme, which has the characteristics of small size, low cost, all-weather working capability, high detection,sensitivity, high precision,easy debug&installation, very good stability and reliability. It is a new type detector which can be perfect alternative of loop detectors.
The sensor antenna is MIMO design that enables the sensor good angular resolution and high angle measuring accuracy. The signal processing and control unit apply DSP+ARM dual core architecture. Through the combined optimization design of software and hardware, this product can accurately identify and judge the targets passing through the barrier arm area, and avoid the accident of "vehicle or person hurt " and "barrier not closed"
Product Features
● Data adjustable by bluetooth & mobile APP ;
● Support direction determination set;
● Improved electronic shield, surge and protect function;
● Imported chip and material;
● Automotive grade components;
● Superior anti-interference and environmental adapt performance. Usable in severe weather like rainy, snowy or frozen days.
PRODUCT SPECIFICATIONS
| Performance | Parameters | Value |
| System Performance | Working Voltage(V) | 9-24V DC (typical value 12V/1A) |
| | Working Temperature(℃) | -40 ℃~ +85 ℃ |
| | Power Consumption(W) | < 2.8 |
| | Frequency(GHz) | 79 |
| | Waterproof Level | IP55 |
| | Interface Port | RS485; Bluetooth |
| | Size (mm) | 107.9*73.6*17.2 |
| | Weight (g) | 132.4 |
| Detection Range | Horizontal Width(m) | ±0.5~±1.5 (Configurable) |
| | Vertical Length (m) | 2~6m (default 3m) |
| Data Upgrade | Online Data Adjust | RS485; Bluetooth |
| | Online Data Upgrade | RS485; Bluetooth |
Copyright Notice
Thank you for choosing our vehicle detection sensor. This kind of sensor is mmWave technology radar sensor with accurate detection and is widely used in parking industry.
it’ s suggested to install the sensor on separate pole, to trigger the barrier gate opening or trigger the camera to capture the vehicle license. also can be used with ticket dispenser and other kind of applications, such trigger function with excellent direction recognition feature.
To ensure the best performance of the sensor product, please carefully read this user manual before use ,and then install and config it strictly following the instructions provided in this manual.
Product Tags:
|
|
Vehicle Millimeter Wave Trigger Radar Automated Parking System Barrier Software and Hardware Images
|
